Other equipment you can hire:
Propping Designs
Corner brackets
Horseshoe brackets
Lintel Brackets
Sandwich boards
Shims
Bolts
Square washers
Propping Designs
Talk to us about our Propping Design Service. We can provide propping plans to industry standard making sure the job runs as efficiently as possible.
Corner brackets
Used in corners to lock together panels 
Horseshoe brackets
These brackets fit over the panel. Bolted on one side with a non-drilled fastening on the other side. Ideal for designer panels where you don’t want to mark the face of the panel.
Lintel Brackets
Ideal for sites where space is tight as they eliminate the need for shoreloading. Light and easy to install with a safe load capacity of 3.8 tonne.
Sandwich boards
Used to lock lintel panels and two panels together at their joints 
Shims
Used for levelling panels. We supply the full size shims at 150mm x 100mm as our experience proves that these are the safest and easiest to use on site and provide maximum bearing for the precast element. Shims come in thickness from 1mm up to 20mm.
Bolts
Connect props to ground anchor point and panels. Our Friulsider / Iccons bolts are standard style expansion fixing. Conform to all EU standards and one of the few bolts with seismic ratings. Standard sizes we stock are 18mm x 110mm & 15mm x 90mm. Drill bits also available.
Square washers
Galvanised square washers 50 x 50 x 3mm. Standard sizes we stock are M16 & M20.
Safety feature to prevent bolts from slipping off prop foot. Our prop feet are designed with raised stoppers to minimise movement.
Safety feature to prevent bolts from slipping off prop foot. Our prop feet are designed with raised stoppers to minimise movement.
